The webcam's wiring inside the screen bezel is a USB connection.
The wires differ from standard usb colors.
Here is a conversion chart.
| Pin # | Desc | Standard Color | EEE Camera Wire Color |
|---|---|---|---|
| 1 | +5(bus) | red | dashed red |
| 2 | data- | white | orange |
| 3 | data+ | green | white |
| 4 | ground | black | black |
Note: During modding, if the bios resets,
the 'internal camera' setting will be turned to disabled(default).
This will cut power until you re-enable it via the bios.
The bios option will not be available if there is no device connected.