Zeee, previously ZenEee, it's a pre-installed image of the Zenwalk on EeePC.
Look this thread: http://forum.eeeuser.com/viewtopic.php?pid=155761#p155761
Umount your usb key if mounted. Create an ext2 file system with cfdisk:
cfdisk /dev/sdc New/Primary Bootable Type 83 Write: yes Quit
Format the USB key (Should be not mounted):
mke2fs -j /dev/sdc1
To prevent fsck from being run on it:
tune2fs -c 0 -i 0 /dev/sdc1
Pick the UUID of your formatted usb key:
/lib/udev/vol_id /dev/sdc1 > /home/foo/uuid_of_your_usb_key.txt
Mount your usb key:
mount /dev/sdc1 /mnt/usb
Untar the tar.gz file:
tar xvf zeneee-1.0-beta3.tar.gz -C /mnt/usb
Replace the UUID by the previously determined.
Replace the UUID by the previously determined:
Install grub:
grub root (hd2,0) setup (hd2) quit
Examples with GRUB:
disk1 => hda => hd0 for GRUB disk2 => hdb => hd1 for GRUB disk3 => hdc => hd2 for GRUB ... (hd0,0) => disk 1, partition 1 (hd0,1) => disk 1, partition 2 ... (hd1,4) => disk 2, partition 5 ... (hd2,0) => disk 3, partition 1 etc ...
You might have to recreate the ”/boot/initrd.gz” file. For this, look the ”/boot/initrd-tree” directory. Edit the “rootdev” file. Change ”/dev/sdc1” string by ”/dev/sdb1” (i have not tested this). Remake the initrd.gz (it's a CPIO GZIP file) with the initrd-tree. directory.