==== How to get a higher resolution with your external monitor ====

Some Eee models (such as the 901) only offer up to 1024x768 resolution when you attach an external monitor. Here we tell you how to fix this. (This doesn't solve the problem with the 701 where higher resolutions only give static - some say that this is due to the 701's underclocking: speed it up slightly and it works fine).

The solution comes in two parts. First, you need to change /etc/X11/xorg.conf, which is set up to say that the maximum resolution is that of the built-in screen (you do this once); then you need to switch the external screen to the resolution you want.

=== Changing xorg.conf ===

Open a terminal with ctrl-alt-T, and change to the right directory by typing:

    cd /etc/X11

Make a backup of the existing file, just in case:

    sudo cp xorg.conf xorg.conf.orig

Now edit the file to set up the correct maximum resolution:

    sudo kwrite xorg.conf

Find the line that says

    DefaultDepth   16

and change the 16 to 24.

Find all the lines that say

    Virtual   1024 768

(there were 4 of them in my file) and change them to:

    Virtual   2048 2048

Save the file (ctrl-S), and exit (ctrl-Q).

Now reboot (ctrl-alt-backspace is enough).

Now you have a system that is capable of handling higher resolutions.

=== Using an external monitor ===

Unfortunately, for some reason that I haven't yet cracked, the "Desktop Mode" program in the Settings tab still doesn't recognise the extended resolution (the resolutions it offers may be just hardwired in). So to start up the external monitor you have to use a terminal again.

Plug your monitor in, switch it on, and crank up a terminal again (ctrl-alt-T).

To see that it has worked, and to find out what resolutions are available, type in the terminal:

    xrandr

This will then tell you which screens are available, and at what resolutions. Mine said:

    Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 2048 x 2048
    VGA connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 271mm
       1680x1050      59.9*+   60.0  
       1600x1200      59.9  
       1280x1024      75.0  
       1152x864       75.0  
       1024x768       84.9     75.1     70.1     60.0  
       1024x600       60.0  
       832x624        74.6  
       800x600        84.9     72.2     75.0     60.3     56.2  
       800x480        60.0  
       640x480        84.6     75.0     72.8     66.7     60.0  
       720x400        70.1  
    LVDS connected 1024x600+0+0 (normal left inverted right x axis y axis) 195mm x 113mm
       1024x600       60.0*+   60.0  
       800x600        60.3  
       800x480        60.0  
       640x480        59.9

VGA is the name of the external screen, and LVGS the internal LCD. Now you can turn on your external screen.

    xrandr --auto

and bingo!, this should leave you with both screens (internal and external) on, at the maximum resolution of the external screen.

You can also pick the resolution you want to use from the available list (for instance 1650x1080), and type in the terminal:

    xrandr --output VGA --mode 1680x1050

You can switch the internal LCD off with

   xrandr --output LVDS --off

To return to using just the laptop screen the 'Desktop Mode' program works just fine, but you can also type:

   xrandr --output LVDS --on
   xrandr --output VGA --off

=== Advanced stuff ===

It works like this: you have a virtual screen of 2048x2048 (which is the largest the hardware supports). You have screens which are windows onto that space.

When you say 'xrandr --auto', both screens are windows on to the same part of the virtual screen (the top left part). However, either or both can be moved to another part.

Simple ways include:

    xrandr --output VGA --right-of LVDS

which puts the external screen to the right of the internal screen. So dragging stuff to the right of the internal screen will make them appear on the external screen.

But there is a caveat: the combined resolution in any direction must be less than 2048. So if you have the internal screen at 1024, the external screen may not be wider than 1024 for this to work.

However, since vertical resolutions are usually the smaller, this is likely to work for high-resolution external screens:

    xrandr --output VGA --above LVDS

(or --below). This is because the sum of the two vertical resolutions is likely to be less than 2048.
Then you have to drag windows to the top or the bottom of the internal screen to get them on the external monitor.

Another option is to have the two screens overlap slightly so that the combination doesn't exceed 2048.

So for instance, if you want to put a 1680x1050 screen to the right of the 1024x600 internal screen, they will have to overlap from pixel position (2048-1680)=368:

    xrandr --output LVDS --mode 1024x600 --pos 0x0 --output VGA --mode 1680x1050 --pos 368x0

===Even more advanced stuff===

You can even rotate one or more screens!

    xrandr --output LVDS --rotate left

Note that the mouse 'rotates' with it.

You can return it with

    xrandr --output LVDS --rotate normal

===Tray screen applet===

If from a terminal you run

    krandrtray

it will start a program up in the program tray. If you click on it, a menu will pop up allowing you to select resolutions and orientations, avoiding having to use the terminal commands above.

===Very high resolution===

Experience with a 2048x1152 screen has shown that the 901 must be plugged in, or at least running at full speed, in order to be able to handle such high resolutions.